Grbl_Esp32 Alarm 7

Grbl_Esp32AlarmPosition isn't set yet: home first

The safety door was opened during homing.

Position isn't set yet: home first. Homing didn't finish. (Hamrun's reading)
What to do
  1. Close the door (or check the door switch input), then home again.
Name in the Grbl_Esp32 source: HomingFailDoor. The meaning above is in Hamrun's words; Grbl_Esp32's own message text isn't copied here. source

Got a different message?

Paste it into the decoder. Hamrun's editor checks your G-code before you run it, so a toolpath that leaves the machine's travel or a missing feed rate is caught before the machine stops. Have the whole file? Check it here, free: it finds the line that triggers this, and the file never leaves your computer.

Related codes

Code name taken from the Grbl_Esp32 source on 2026-11-10; the meaning is in Hamrun's words and Grbl_Esp32's message text isn't copied. Steps and the position answer are Hamrun's reading unless marked “firmware says”. User reports are labelled CLAIMED.